Goku hueforge

Project: goku.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmThe Model is 259.7x461.54mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #0056b8 PLA BambuLab Basic Cobalt Blue Transmission Distance: 1.2 #e11021 PLA Copymaster 3D Red Transmission Distance: 4 #ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5 #e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8 #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 6 unique filamentsSwap Instructions: Start with PolyLite Black At layer #7 (0.72mm) swap to BambuLab Basic Cobalt Blue At layer #9 (0.88mm) swap to Copymaster 3D Red At layer #14 (1.28mm) swap to BambuLab Basic Pumpkin Orange At layer #17 (1.52mm) swap to BambuLab Basic Beige At layer #19 (1.68mm) swap to BambuLab Matte Ivory White for the re