Goku

Project: Goku dark.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 135.83x239.99mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.3mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA PolyLite Dark Blue Transmission Distance: 0.5 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 5 PLA PolyLite Pro Cold White Transmission Distance: 0.5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #5 (0.48mm) swap to Dark Blue At layer #8 (0.72mm) swap to Jade White At layer #10 (0.88mm) swap to Black At layer #14 (1.2mm) swap to Red At layer #16 (1.36mm) swap to Orange At layer #17 (1.44mm) swap to Jade White At layer #21 (1.76mm) swap to Black At layer #22 (1.84mm) swap to Cold White for the rest.