goku super sayan

Project: goku 1 stl.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 112.54x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Basic Dark Gray Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Dark Gray At layer #9 (0.8mm) swap to Red At layer #14 (1.2mm) swap to Pumpkin Orange At layer #23 (1.92mm) swap to Jade White for the rest.