Thingiverse
Google Pixel 3 Bumper Case
door kcchen_00
103
Downloads
60
Likes
1
Makes
Bumper case for Pixel 3. Needed something quick before an upcoming trip.
Original idea was to scale zvalentine22's Pixel 2 Bumper:
https://www.thingiverse.com/thing:2614340
But found that the buttons were off. So modified the button cut-out and made the case symmetrical top and bottom to protect the glass.
Model versions:
V7 - 68.5mm wide
V8 - 69mm wide (for rigid filaments)
Scale in slicing software to fit phone for printer calibration.
*TIP* - Install phone from back of bumper (modified top and bottom bezel to be a little thinner). Easiest if corner above button cut-out is the last to be inserted.
Original idea was to scale zvalentine22's Pixel 2 Bumper:
https://www.thingiverse.com/thing:2614340
But found that the buttons were off. So modified the button cut-out and made the case symmetrical top and bottom to protect the glass.
Model versions:
V7 - 68.5mm wide
V8 - 69mm wide (for rigid filaments)
Scale in slicing software to fit phone for printer calibration.
*TIP* - Install phone from back of bumper (modified top and bottom bezel to be a little thinner). Easiest if corner above button cut-out is the last to be inserted.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
