Gothic II logo Hueforge

I printed it with 0.2 nozzle, but will work with 0.4 too. Adjust layerd accordingly. Feel free to go with SIlver and the like if you're not a fan of non metalic metal shading. Key things to adjust:layer line should be lowturn off fansadjust bed to lower temp if needed Project: Gothic II.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 187.5x51.42mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Silver Transmission Distance: 0.5 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #4 (0.4mm) swap to Black At layer #9 (0.8mm) swap to Blue Gray At layer #12 (1.04mm) swap to Gray At layer #17 (1.44mm) swap to Jade White At layer #22 (1.84mm) swap