Thingiverse
GPD Win Max Grip, Sliding
por ProjectSBC
16
Descargas
8
Likes
0
Makes
This is a sliding grip for the GPD WIN MAX! You can see me use it in this video
https://www.youtube.com/watch?v=woiM8HP47p4&t=7s
Each side is made up of the base, a grip top and bottom. They are designed to slide onto the base and you can glue them so they don't slide off.
The middle piece that connects the two halves is the cover slide grip.
Additional hardware needed are 2 M3x16 mm bolts, and 2 rubber bands. Video to assemble will go up in the next few days.
All 4 grip pieces are designed to be printed without supports with flat surface down.
LBase and RBase doesn't need supports but your printer may have trouble with some overhang features.
Cover slide grip is designed to printed so the end looks like a house with the pointed side pointing up. This prevents the use of supports.
https://www.youtube.com/watch?v=woiM8HP47p4&t=7s
Each side is made up of the base, a grip top and bottom. They are designed to slide onto the base and you can glue them so they don't slide off.
The middle piece that connects the two halves is the cover slide grip.
Additional hardware needed are 2 M3x16 mm bolts, and 2 rubber bands. Video to assemble will go up in the next few days.
All 4 grip pieces are designed to be printed without supports with flat surface down.
LBase and RBase doesn't need supports but your printer may have trouble with some overhang features.
Cover slide grip is designed to printed so the end looks like a house with the pointed side pointing up. This prevents the use of supports.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
