Grace Quilting Wheel Lock

This is a Wheel Lock for a Grace Quilting system to prevent the carriage from moving.
This works with our Grace table and Carriage but is no guarantee it will work with all.

Print all the parts. You need 2 Wheel locks, 2 Couplers, 1 Coupler Lock and 1 Wheel Lock Plug.

This was printed with Esun PLA+. You will glue the Couplers at the bottom center of the wheel Lock plates with superglue.

Place each plate in between the wheels of the carriage and insert the plug in one of the lock plates (see picture). Then use the coupler to lock the plates around the wheels.(see picture)

Probably not the best solution, but it works without modification of the carriage or other parts of the Quilting table.