Graffiti Rem Hueforge

Want to sell my prints? Commercial License now available here: https://patreon.com/3ReePrinting MembershipCommercial License also available here! Check out the rest of my Hero/Villain series here: https://makerworld.com/@3ReePrinting/collections/3340968 Commission for Rem from Re:Zero. You can yield similar results of you substitute Glow Pink for Basic Pink and Glow Blue for Basic Cyan! This print is the maximum build plate size for an A1 Mini, but it should work on any printer. If you resize the model make sure you do NOT scale the Z axis or the print colors will not be in the same position Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm The Model is 170x170mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #00358e PLA BambuLab Basic Blue Transmission Distance: 4 #f17b8f PLA Ba