Graphics Stand Graphics card

A simple PC graphics stand to help protect your graphics from sagging The small nut in the middle is used to clamp the whole structure There are two lengths 1. Short length supports 24mm to 36mm 2. Long length support 30mm to 49mm It is recommended to use pla material and print with 0.08 can get good results If you have any questions, you are welcome to communicate 一款简单的电脑显卡支架，可以有效避免显卡下垂导致的变形 中间的小螺母是为了卡紧整体结构 长度有两款 1.短款长度支持24mm到36mm 2.长款长度支持30mm到49mm 建议使用pla材料使用0.08打印可以获得良好的效果 有问题欢迎大家交流