Grappling Hook - Unchaterd 4

Grappling Hook - Unchaterd 4 This is a Remix of : Grappling Hook - Unchaterd 4 by That3DPrintGuyOnly minor tweaks and scale set for easier printing, all design credit to That3DPrintGuy for a great moving model that looks awesome !!!!Be careful when gluing the "Upper-Shaft" and "Lower-Shaft" together, the centre join is offset, and the grappling arms need to line up with the holes in the "Lower-Shaft" so suggest attaching the arms, before gluing !You will need to print 3 x "Arm" and 3 x "Pin_and_Cap"The "Top_Screw_Spacer" is optional, you can use this if your "Top_Screw" does not go down far enough.Updates to original models as follows:1) Scale,I used a scale of 5:1 from the original size loaded in my Slicer - this is still more child sized than "Man-Sized".2) A few pieces have been scaled to allow for bigger tolerances, the "pins" and "top screw", as they were too tight for me in the original models.3) Arm