Gravity Light - Modern Torch – 3D printable model from MakerWorld

MakerWorld

Decor

Gravity Light - Modern Torch

by RileyDesigns · Decor

14 Downloads

64 Likes

3 Makes

Go to Model

This is the Gravity Light, an easy to use lamp that turns on when you flip it over. This feature makes it easy to use to quickly get some light without fumbling around in the middle of the night looking for a switch or button. Though this feature is handy, it also works with a simple toggle button with the flipping functionality completely optional. You can expect a 6 hour battery life and it recharges with USB-C. Assembly: Optional: Do this step if you want the flipping functionality, but it requires some simple soldering.Cut a 1/2in (13mm) section out of the red wire connecting your light to the power board. Take your tilt switch and verify what direction is on, and what is off. On a multimeter you can set it to Ohms or resistance and on will be the side that says a low value near 0 where off will be OL. Solder it onto the wire with the up/on direc

light switch turn electronics maker lab contest torch flashlight night light reading light accent modern acrylic fun interesting soldering no soldering plug and play wires brown

Category

Decor

Source

MakerWorld

Published

11.01.2026

Updated

11.04.2026

What you need to print this: Intermediate Medium confidence

Why?

large print

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

200 mm (Large)

Est. print time

6 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Gravity Light - Modern Torch?

Any FDM printer should handle Gravity Light - Modern Torch just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

How long does it take to print Gravity Light - Modern Torch?

According to the design notes, Gravity Light - Modern Torch takes approximately 6 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Gravity Light - Modern Torch available in?

Gravity Light - Modern Torch is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Gravity Light - Modern Torch free to download?

Yes, Gravity Light - Modern Torch is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee

DE EN FR ES IT NL