Gray Mountain Wolf Hueforge

Gray mountain wolf Hueforge Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.1mmFilaments Used: PLA BambuLab Matte Ash Gray Transmission Distance: 0.1 PLA BambuLab Basic Gray Transmission Distance: 0.1 PLA BambuLab Basic Dark Gray Transmission Distance: 0.1 PLA BambuLab Matte Dark Green Transmission Distance: 0.1 PLA PolyTerra Charcoal Black Transmission Distance: 0.1 PLA Elegoo Black Transmission Distance: 0.1 PLA BambuLab Matte Lemon Yellow Transmission Distance: 3.1 PLA Elegoo White Transmission Distance: 5.3This print uses 8 unique filaments Swap Instructions: Start with Ash Gray At layer #10 (0.52mm) swap to Gray At layer #12 (0.6mm) swap to Dark Gray At layer #14 (0.68mm) swap to Gray At layer #17 (0.8mm) swap to Dark Green At layer #24 (1.08mm) swap to Charcoal Black At layer #26 (1.16mm) swap to Black At l