Green Dragon HueForge with frame

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.44mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #6d0640 PLA BambuLab Matte Plum Transmission Distance: 1.3 #156945 PLA BambuLab Basic Green Transmission Distance: 2 #cedd00 PLA BambuLab Basic Bright Green Transmission Distance: 3.8 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Plum At layer #7 (0.64mm) swap to Green At layer #9 (0.8mm) swap to Bright Green At layer #13 (1.12mm) swap to Jade White for the rest.