Greenkeeper Desk Stand

This stand is used to hold the RTS Greenkeeper 35 kV grassing device. The stand offers a safe way to place the Greenkeeper in upside-down position so that no flock material can fall out unintentionally. The upside-down position is also very practical when filling or replacing the flock material. The plug for the earth/ground cable does not need to be removed. For a safe standing, the stand can be provided with three rubber buffers on the bottom, special grooves (11 x 1.5 mm) are provided. Furthermore, the holder is fitted with a hollow space, which I filled with Raysin (gypsum). Compared to printing with high infill, this is cheaper, quicker and a higher total mass can still be achieved. Design FactsThe stand is designed so that the Greenkeeper can be slid sideways into the upper area, where the opening angle is over 180°. This guide area allows it to be inserted precisely into the main holding area, where the opening angle is less than 180°, which ensures that it cannot fall out unint