Gremlin HueForge

Artwork is not by Leonardo Da Vinci ;) , but the author is: Yuriy FrenkelThen used HueForge v0.8.1 to create the model. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.I made two version size the .stl file. In the printing profile is used 200x200 and the second is small 150x150 mm (for A1Mini). The color change settings are identical. Or you can only modify the X and Y dimensions. Do not adjust the height (Z) in your slicer! The layers would not be correct. You may print at higher layer heights below the Min Depth of 0.48mm. The Max Depth is 2.2mm and the Actual Depth is 2.2mm. It is possible to print without AMS by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support. ilaments Used: PLA Eleg.oo + Black Transmission Distance: 0.3 PLA Devil design Dark Brown Transmission Distance: 0.6 PLA Eleg.oo + Gray Transmission Distance: 3 PLA Eleg.oo + White Transmission Distance: 6This print uses 4