MakerWorld
Organizers
Vai al Modello
Gridfinity baseplates for Ikea Kallax
22
Download
1
Likes
10
Makes
Gridfinity baseplates for Ikea kallax shelves.I included two print profiles: one for printers with 256x256x256 or H2 printers, and one for A1 mini's.256x256x256 and above:Print two 4x4 baseplates, along with two 4x5 ones. Use 17 connection pieces. Those are all included across 4 plates in the profile.A1 mini:Print 4 plates of 4x4 baseplates, 2 1x4 baseplates and 25 connectors. All distributed over 5 plates in the included printing profile.I used PLA, which is fine for these applications.Because the Kallax is open, after printing put a few pieces of double sided tape on the bottom, not every row is needed, just a few. After that stick it down and it will stay put. Boost MeI make my models (including these gridfinity ones) with a lot of dedication, and can really appreciate a boost. If you like my design, please consider boosting me!Thanks!
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
