Grim Reper HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Purple Transmission Distance: 4 PLA BambuLab Tough Cream White Transmission Distance: 10This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #13 (1.12mm) swap to Purple At layer #17 (1.44mm) swap to Cream White for the rest.