Grimmjow Jaegerjaques Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mmThe Model is 112.54x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.52mmThe Max allowed Thickness is 2.28mm and the Actual Thickness is 1.8mm #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #00b1b7 PLA BambuLab Basic Turquoise Transmission Distance: 1.4 #0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5This print uses 4 unique filamentsSwap Instructions: Start with Charcoal At layer #8 (0.76mm) swap to Jade White At layer #12 (1.08mm) swap to Turquoise At layer #19 (1.64mm) swap to Cyan for the rest.