Gripper robot

This capture is designed for 3D printing on any printer.
You will need to manufacture
1. Print all parts
2. 2x bearing 4х9х4 and 1x bearing 5х9х4 (if not, you can print substitutes, in the archives they are)
3. Servo drive SG90 or equivalent
4. 2x bolts m4 18mm
5. 3x bolts m3 16mm
6. 4x bolts m3 10mm
7. 2x bolts m3 26mm
8. 4x self-tapping screws for servo