Grönö LED

**This is still work in progress! Open points are:**

* There is no holder/attachment for the microcontroller Board, I justed hotglued it...
* The two notches on the bottom should grab on two bumps on the bottom of the lamp. This did not work, but it's tight nevertheless.
* The adhesive tape is not strong enough to keep the LED strips attached, the keep getting loose, probably also because of the heat
* I added some "wings" to the nut, because it wasn't very easy to screw tight in the glass. they are untested so far

# Grönö LED

I had some old IKEA Gröno lamps I didn't use any more. So I decided to combine one of them with some WS2812b LED strips and a Wemos D1 mini board (ESP8266). Together with the lid from https://www.thingiverse.com/thing:2623376 you have a nice little Lamp to use with home automation.

## Hardware

You need:

* 1 IKEA Grönö lamp
* self-adhesive WS2812b LED strip (I used 4 x 17 LEDs; depends on the LED density)
* Wemos D1 mini (or another ESP8266