guide rail stop bracket Festool

This is a limiter for quick installation of the guide rail without marking. There is a left and right part. They are attached under the guide rail to the side edge which is the reference point from the ends of the workpiece. In my photos this is the front edge, I retreat 20mm, there are wooden blocks wrapped with yellow tape. They fix the 20mm offset. But this distance can be slightly different at your choice. I did this for repeated grooving operations. There is no stopper on these brackets. So as not to complicate the product. I just glue the block to double-sided tape and paper tape. There are two sets with a height of 15mm - this is convenient for grooving and non-through cutting. And there is a height of 40mm - this is convenient for deeper cutting.These brackets have notches 5mm from the edge of the guide rail, for faster positioning. These brackets do not interfere with the use of clamps. But I only hold the rail with my hand while cutting.Total length 270mm, but fits on diagona