Thingiverse
Guild Wars 2 Bookend
par MarcusPfeiffer
12
Téléchargements
11
Likes
0
Makes
3 Part bookend for fans of the game, Guild Wars 2.
Print the logo in a different colour than the rest of the bookend.
The tongue and logo don't need support or brims. I always do a skirt line so that the filament is working nicely before the main components are printed.
The main "GW2 Book End - base" file should have Support "touching build plate" only set, and that at only over 80 degrees so that it only supports one line of necessary overhang at the union between the base and the tongue.
Everything fits nicely together but you'll need two little screws underneath to keep the tongue attached.
I have infill set at 20%.
Print the logo in a different colour than the rest of the bookend.
The tongue and logo don't need support or brims. I always do a skirt line so that the filament is working nicely before the main components are printed.
The main "GW2 Book End - base" file should have Support "touching build plate" only set, and that at only over 80 degrees so that it only supports one line of necessary overhang at the union between the base and the tongue.
Everything fits nicely together but you'll need two little screws underneath to keep the tongue attached.
I have infill set at 20%.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
