Guinness HueForge

Artwork source - Pinterest.Then used HueForge v0.9.2.3 to create the model. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.The Model is 200x150mm in size. Do not adjust the height (Z) in your slicer! The layers would not be correct. You can only modify the X and Y dimensions. You may print at higher layer heights below the Min Depth of 0.48mm. The Max Depth is 2.08mm and the Actual Depth is 2.08mm. It is possible to print without AMS by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support. These were my settings and colors for my print that you see in the picture. Your results may be depending on the filament you use.PLA Sunlu META Grey Transmission Distance: 3.6PLA Elegoo + Orange Transmission Distance: 6PLA Aurapol Beige Transmission Distance: 2.4PLA Elegoo Basic White Transmission Distance: 7This print uses 5 unique filamentsSwap Instructions:Start with BlackAt layer #10 (0.88mm) swa