Guitar Peg Winder Bit

This model is somewhat modeled after the Music Nomad Peg Winder Bit. I don't actually have one of those, so I modeled this off of pictures. The main difference is that you can use almost any ¼" socket adapter with this bit. I've created two separate models. One has a PETG core and TPU for the outer portion that makes contact with your tuning pegs. The other model is all PETG. For the multi-material model, print the PETG part first, then print the TPU part. When printing the TPU part, there's a pause set for you to place the PETG part inside the TPU part. Just make sure there are no TPU "boogers" on the nozzle before resuming the print. The .3mf is currently set up to print the PETG on a Textured PEI plate while the TPU is set to print on an Engineering plate. I did this for speed of printing so I didn't have to put glue on the engineering plate, print in PETG, wash the plate, then print in TPU. You can absolutely just print on one type of plate if you prefer. Also, the silver paint pen