GUNDAM

Project: .autosave.v0.7.3.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA PolyTerra Army Blue Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Matte Lilac Purple Transmission Distance: 2 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Matte Ivory White Transmission Distance: 4This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Army Blue At layer #9 (0.8mm) swap to Blue At layer #12 (1.04mm) swap to Red At layer #20 (1.68mm) swap to Lilac Purple At layer #23 (1.92mm) swap to Yellow At layer #25 (2.08mm) swap to Ivory White for the rest.