Guns N rose

Print at 100% infill with a layer height of 0.16mm with a base layer of 0.16mmThe Model is 200x112mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.4mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA Generic White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 5.4 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5This print uses 5 unique filamentsSwap Instructions: Start with Charcoal At layer #4 (0.64mm) swap to White At layer #5 (0.8mm) swap to Red At layer #9 (1.44mm) swap to Yellow At layer #12 (1.92mm) swap to Ash Gray for the rest.