Gyarados Card

Description:Oversized Gyarados Pokemon Card with Gyarados popping out of the card! We used hueforge to create the pokemon card and a 3d model of gyarados. This fusion lead to a beautiful 3d wall art that can be printed and put on your wall. The Model is 164.81x225mm in size. You may print at higher layer heights below the Min Depth of 0.8mm.The Max Depth is 3mm and the Actual Depth is 3mm Total Filament: 5 Filaments Used:PLA BambuLab Matte Charcoal Transmission Distance: 0.6PLA BambuLab Matte Marine Blue Transmission Distance: 0.5PLA BambuLab Matte Ice Blue Transmission Distance: 3.5PLA BambuLab Matte Ivory White Transmission Distance: 3.5PLA BambuLab Basic Yellow Transmission Distance: 6 Print Instructions:Print at 100% infill with a layer height of 0.16mm with a base layer of 0.16mm.Gyarados:Model should be set at desired sparse infill density with this one being tested with 15% sparse infill density with gyroid pattern. Model was printed with a .16mm layer height with a majority of