Thingiverse
Gyro Air
von Dalpek
13.2k
Downloads
10.6k
Likes
104
Makes
IMPORTANT: Do not scale the object or it will be too thin and brake.
The gyro designs I saw on the internet were too heavy looking and used a lot of material, so I set out to make one that looked elegant and thin. It had it´s challenges, but after 5 prototypes and a lot of PLA, I arrived at Gyro Air. I don't like supports, so I made every form nice and round. The nipples that worked best are derived from the parametric gyro cube from smorloc
By popular demand I have uploaded a smaller version.
https://youtu.be/dMZzUBG6w0s
The gyro designs I saw on the internet were too heavy looking and used a lot of material, so I set out to make one that looked elegant and thin. It had it´s challenges, but after 5 prototypes and a lot of PLA, I arrived at Gyro Air. I don't like supports, so I made every form nice and round. The nipples that worked best are derived from the parametric gyro cube from smorloc
By popular demand I have uploaded a smaller version.
https://youtu.be/dMZzUBG6w0s
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
