H2D AMS Nozzle Quick Change

This system allows you to quickly change which nozzle each AMS supplies on the Bambu Labs H2D. I have access to the back of my H2D and wanted a quick change solution that mounted to the rear of the printer. The single base mounts using 3 - 3x12mm screws and supports up to 8 AMS units, 4 to each nozzle. The add on base doubles that for those mad lads that maxed out the 4 AMS and 8 AMS HT units the H2D supports. Also included is a PTFE cutting guide for the two lengths of tubing required.Hardware requiredPC4-M10 - 8 for each base and 1 for each AMSM3x12 button head screws - Qty 7 for one base 14 for twoM3x8 button head screws - Qty 1 for each baseBambu 4-in-1 PTFE Adapter - 2 for each base10x2 round magnets - 16 for each base and 2 for each AMS or 10x4 magnets - 8 for each base and one for each AMS. I had 10x2 magnets on hand and doubled them up.PTFE tube - 486mm per base and extra if using both basesCA Glue.2-1 PTFE adapter - Qty 2 only if using the second base AssemblyEach AMS tab will