Thingiverse
H7 led alignment shim
door Doomingos
2
Downloads
6
Likes
0
Makes
Shims designed to better align the h7 LED bulb inside the optic of your car.
First try moving the bulb inside the optic without fixing it in order to find the best position for the flattest light cutout (so you don't blind the drivers from the incoming traffic) while maximizing the light output.
In my case I used the angled shims to slightly raise the led buld tilt and on one side it required extra 1mm shim to achieve the best focust and light output.
Print in PETG or ABS/ASA for temperature resistance as the LED bulbs easily reach 60+ºC
Enjoy!
First try moving the bulb inside the optic without fixing it in order to find the best position for the flattest light cutout (so you don't blind the drivers from the incoming traffic) while maximizing the light output.
In my case I used the angled shims to slightly raise the led buld tilt and on one side it required extra 1mm shim to achieve the best focust and light output.
Print in PETG or ABS/ASA for temperature resistance as the LED bulbs easily reach 60+ºC
Enjoy!
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!