H8 mini quad frame

H8 Mini quad frame(x1). Includes motor/blade protector(x4), and battery holder(x2). Parts need to be glued. I use loctite super glue for PLA, and loctite plastic bonding system for t-glase. Highly recommend printing in a translucent filament. The spherical domes built into the model, spread the light from the leds into the frame making it much more visible allowing it to be flown at a further distance at night. I print the battery holder without support material, which gives some sagging, and this is what I rely on to hold the battery tight, not an ideal solution but works, given these types of batteries are not a uniform size. I perhaps in the future will redesign the holder to incorporate a form which uses spring tension. Edit: Included a version of the main frame with an motor hole dimension of exactly 6mm, depending on how your particular printer prints to achieve pressfit design, if it is too tight, recommend using a 15/64" /5.94mm drillbit for trimming.