Hack Pack Turret Laser Mount

With this 3D printed bracket, you can mount a laser on the front of your [Hack Pack]((https://crunchlabs.refr.cc/jeremydunsworth))* turret.

Disclaimer: Lasers are dangerous. Don't point lasers at yourself or others (including animals). Don't point lasers at airplanes.

The download includes the Fusion 360 source for those who would like to make adjustments.

**Additional parts required**
- 6mm diameter laser diode / laser tube ([tested with these](https://www.amazon.com/dp/B071FT9HSV))
- Wires to connect the laser to your Arduino
- DuPont connectors and crimping tool if you want to match the stock wiring

**Installation**
- Route your laser wires through the back panel of the turret, alongside the stock wires
- Wire up your laser! The positive wire should go to digital pin 8 on the arduino (right next to the stock purple wire). The ground wire can go to any ground pin (next to the stock black wires). _Note_: The laser I linked has a built in resistor. You may need to wire