Thingiverse
Hairy Cousin It
by Phelps3D
59
Downloads
88
Likes
0
Makes
Inspired by the Hairy Lion by by _primoz_ http://www.thingiverse.com/thing:2007221, I decided to try my hand at making a hariy 3D printable Cousin-It from the Adams Family.
This is printed at 0.2 mm layer height, with a 0.4 mm nozzle at 10% infill. No supports on the main body.
I recommend printing the glasses with the small posts down with supports.
I recommend printing the hat with the square front part facing up with supports. (I originally did it with the top of the hat down with supports, but trying to get them out of the small hole in the square was a pain.)
The most difficult part of this process is trying to cut the hairs, many broke off my model. I would suggest using a blade with a wider width than the one I used here. Also, you might want to try to only cut a few layers at a time. ABS might be a little better than PLA as far as breaking off the hairs. It's trick, but you have to cut all of the hairs away from the disposable cylinder that surrounds the model.
This is printed at 0.2 mm layer height, with a 0.4 mm nozzle at 10% infill. No supports on the main body.
I recommend printing the glasses with the small posts down with supports.
I recommend printing the hat with the square front part facing up with supports. (I originally did it with the top of the hat down with supports, but trying to get them out of the small hole in the square was a pain.)
The most difficult part of this process is trying to cut the hairs, many broke off my model. I would suggest using a blade with a wider width than the one I used here. Also, you might want to try to only cut a few layers at a time. ABS might be a little better than PLA as far as breaking off the hairs. It's trick, but you have to cut all of the hairs away from the disposable cylinder that surrounds the model.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
