Halloween Windup Flying Mini Bat

Instructions for 3D Printing and Assembling a Flying BatPrint PreparationBefore starting the print, make sure the print bed is perfectly clean.Set the first layer height to 0.12 mm.Set subsequent layers to 0.08 mm for increased strength.It is recommended to print on a textured PEI sheet for easier removal of the finished print.Required Materials3D printed bat model.2–3 rubber bands from a beginner’s set.AssemblyAttach the rubber bands to the designated hooks on the model.Carefully twist the bat’s wings to tension the rubber bands.Wind at least 30 times (depending on the number of rubber bands used).UsageYou can hide the prepared bat under a bowl with folded bones or another object.Once released, it will fly out and surprise the unsuspecting observer.Tip: After each use, check whether the rubber bands are worn out and replace them if necessary Boost MeThank you very much for the boost :) :) :) Membership