Halo Hueforge 1

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmIf changing size . . . only change X and Y, not Z.The Model is 240x160mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.5mm and the Actual Depth is 2.6mmFilaments Used:PLA BambuLab Black Transmission Distance: 0.3PLA BambuLab Basic Green Transmission Distance: 2PLA BambuLab Gold Transmission Distance: 2PLA Sunlu White Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #10 (0.88mm) swap to GreenAt layer #15 (1.28mm) swap to GoldAt layer #17 (1.44mm) swap to White for the rest.