HALO MASTER CHIEF

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5 !!!! It appears you have mixed filament types. Be certain this is what you want. !!!!! Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue At layer #10 (0.88mm) swap to Red At layer #14 (1.2mm) swap to Yellow LAYER 16 PAUSE CHANGE COIL 1 OF THE AMS TO BALNCO AND PRESS CONTINUE At layer #17 (1.44mm) swap to Jade White for the rest. Imprima al 100% de relleno con una altura de capa de 0,08 mm y una capa base de 0,16 mm Filamentos utilizados: PLA BambuLab Basic Negro Distancia de transmisión: 0,6 PLA BambuLab Basic Azul Distancia de transmisión: 4 PLA BambuLab Basic Rojo Distancia de transmisión: 4 PLA BambuLab Basic Amarillo D