Halong Bay HueForge with frame

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 170x300mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.84mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #156945 PLA BambuLab Basic Green Transmission Distance: 2 #002a96 PLA BambuLab Basic Cobalt Blue Transmission Distance: 1.2 #0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5 #00b1b7 PLA BambuLab Basic Turquoise Transmission Distance: 1.4 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 7 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Green At layer #8 (0.72mm) swap to Cobalt Blue At layer #10 (0.88mm) swap to Cyan At layer #13 (1.12mm) swap to Turquoise At layer #15 (1.28mm) swap to Jade White At layer #19 (1.6mm) swap to Yellow for t