Hammerhead shark with base - Scalable

This is the second animal added to my Animal's models collection https://makerworld.com/@Savo222/collections/2908891, like the others, the mesh is pretty dense so is scalable as you want. Follow me to see the next animals I'll release! The print profile provides the perfect supports settings, here's some details:Printer settings - Extruder:- Z hop when retract: 1mmQuality settings:- Nozzle: 0.4mm- Layer height: 0.2mm- Seam position: Aligned- Adaptive layers down to 0.1mm where neededStrength settings:- Wall loops: 3- Top and bottom shell layers: 4- Sparse infill: 8% LineSpeed settings:- Outer wall: 40 mm/s- Top surface: 100 mm/s- Slow down on overhangs- Support: 60 mm/s- Support interface: 60 mm/s- Acceleration normal printing: 5000 mm/s- Acceleration outer wall: 3000 mm/sSupport settings:- Support type: tree (auto)- Threshold angle: 15°- On build plate only: OFF- Remove small overhangs: ON- Initial layer expansion: 5mm- Top Z distance: 0.16mm- Bottom Z distance: 0mm- Top i