Thingiverse

hand mixer holder

by dd_

26 Downloads

24 Likes

0 Makes

The original supplied wand holder of my hand mixer ("Zauberstab") broke and I was happy to build it myself. I basically copied it, but changed some details so that becomes more stable and easy printable without support.

about the pictures of the print:
Since I'm impatiant I printed it with 0.6mm nozzle, 0.4mm layerhight, pretty hot and slow - 2hours. It looks good and does the job.
Filament is ABS but of course it should print and work with any (stable) filament.

attached again the fusion project file.

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports · 0.40mm layers

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

ABS

Layer height

0.4 mm

Est. print time

2 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does hand mixer holder need supports when printing?

No supports needed for hand mixer holder — it's designed to print clean off the bed.

How long does it take to print hand mixer holder?

According to the design notes, hand mixer holder takes approximately 2 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is hand mixer holder available in?

hand mixer holder is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is hand mixer holder free to download?

Yes, hand mixer holder is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

hand mixer holder

Add to Collection