Thingiverse
Handi-Saw 2000
por alchemistTi
8.1k
Descargas
5.7k
Likes
11
Makes
Recently Updated!! Better contour, jimping, and more ALL AT NO EXTRA CHARGE! ;c)
Note: Metal blade compatibility coming soon, as well as a no-hardware option! Legacy files available for a limited time.
This is a simple print that allows you to buy cheap Sawzall blades and cut with them by hand. It's remarkably fast at cutting if you choose the right blade - I recommend finer-tooth blades like the one pictured. Two machine screws and nuts are required, and a 2nd hole must be drilled into the blade for a 2nd handle anchor point. The handle works best with 9" blades in a recessed, full-tang format. Extra long or shorter blades can be a little harder to work with. The nuts and bolt heads are recessed into the handle for extra comfort. There are many different screw and nut combinations that can work with this handle, but I used hex nuts that are 5/16" from flat side to flat side, and a pan-head screw with a 7mm OD head and 3/8" long. Thread type doesn't matter as long as your nuts a
Note: Metal blade compatibility coming soon, as well as a no-hardware option! Legacy files available for a limited time.
This is a simple print that allows you to buy cheap Sawzall blades and cut with them by hand. It's remarkably fast at cutting if you choose the right blade - I recommend finer-tooth blades like the one pictured. Two machine screws and nuts are required, and a 2nd hole must be drilled into the blade for a 2nd handle anchor point. The handle works best with 9" blades in a recessed, full-tang format. Extra long or shorter blades can be a little harder to work with. The nuts and bolt heads are recessed into the handle for extra comfort. There are many different screw and nut combinations that can work with this handle, but I used hex nuts that are 5/16" from flat side to flat side, and a pan-head screw with a 7mm OD head and 3/8" long. Thread type doesn't matter as long as your nuts a
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
