Thingiverse
Handle M5 mount
di lukeskymuh
9
Download
6
Likes
0
Makes
A simple but comparativly strong handle. Designed to be easy to print: overghangs limited to 45° and tolerances of 0.2mm forseen.
You will need:
2x M5 bolts (lenght: 23 to 29mm + Wall thickness)
2x M5 nut (to be inserted into the slids)
Two 6mm holes must be drilled 180mm apart in to the wall to insert the M5 bolts fron the back
It is 208mm long, so it might be needed to place it diagonal, deactive autoscale, brims and skirts depending on your printer heatbed size.
You will need:
2x M5 bolts (lenght: 23 to 29mm + Wall thickness)
2x M5 nut (to be inserted into the slids)
Two 6mm holes must be drilled 180mm apart in to the wall to insert the M5 bolts fron the back
It is 208mm long, so it might be needed to place it diagonal, deactive autoscale, brims and skirts depending on your printer heatbed size.
lukeskymuh pubblica anche su
4 modelli aggiuntivi su altre 1 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
