Thingiverse
Handwired MacroPad "ZM221"
von zoone
7
Downloads
6
Likes
0
Makes
Macropad ZM221
There are many macropad designs out there, but I wanted to design my own.
1. 3D Print Friendly - Easily print on any printer, using any material.
2. Minimal two-piece design.
3. No fancy hardware required.
parts list
1. Pro Micro (any arduino with built-in HID, size 18mm x 35mm)
2. 1N4148 diode x 5
3. Cherry mx style switch x 4
4. Rotary encoder x 1
5. MISC wire and solder.
6. Hot glue.
7. keycaps.
I used QMK as the base firmware.
https://qmk.fm/
There are many macropad designs out there, but I wanted to design my own.
1. 3D Print Friendly - Easily print on any printer, using any material.
2. Minimal two-piece design.
3. No fancy hardware required.
parts list
1. Pro Micro (any arduino with built-in HID, size 18mm x 35mm)
2. 1N4148 diode x 5
3. Cherry mx style switch x 4
4. Rotary encoder x 1
5. MISC wire and solder.
6. Hot glue.
7. keycaps.
I used QMK as the base firmware.
https://qmk.fm/
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
