Happy Beholder

Happy Beholder! I started with an AI generated image - It was supposed to be an angry fierce beholder … but I couldn't get the AI to make it angry while also keeping eyes on the ends of the eye stalks. So you get a happy beholder. I used Hueforge to make the model, this is the first time I've actually gotten colours close to what I want in a Hueforge model - because I finally watched some tutorials and learned a trick or two. :)This prints using very thin layers - 0.04mm (0.2 on the first layer), I've heard the A1 / A1 Mini wont go that thin, check this before you try it if you have an A1 or A1 Mini. In the pictures - the reddish one printed better, however I used the wrong green filament, it wasn't supposed to be so red. I reprinted it using Bambu Green.Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm You may print at higher layer heights below the Min Depth of 0.48mmThe final depth is 2.2mm Filaments Used:PLA BambuLab Black OR Matte Charco