Happy Kitten Bookmark

This is a HueForge Happy Kitten Bookmark The profile I added will require a 0.2mm nozzle. The print profile is set to a 0.04mm layer height *** I found that setting the part cooling fan to 40% on the filament profiles improved my print quality, your milage may varry depending on the filaments that you use *** You will need a Black PLA with a 0.1 TD, and a White PLA with a TD of 6.6 to get the results that I show in the photos. I used Marswork Black PLA, and Polysonic White PLA The profile I added removes the large transparent area under the bookmark that will show up in the .stl file, and it adds a small 5mm cylinder cutout at the top for a tassel. If you download the .stl file directly to remove the large transparent area you just need to use the cutting tool to cut it off. Set the tool to a height of 0.01 and cut off the bottom, keep the top. After slicing the model set the color change from black to white at layer #9. Below is the information taken from the HueForge description file