Thingiverse

Hapstone V7 Vertical Rod Mount

by leadingedge

32 Downloads

25 Likes

0 Makes

This is a vertical Rod mount for the Hapstone V7 knife sharpener.

Install the mount on your Hapstone V7. There are 2 holes in the middle area of the V7 platform that is used for this purpose. This is to move your V7 square vertical rod closer to the front of the sharpener to enable higher sharpening angles, or to be used with the optional rotating clamp system.

Parts:
3 x M4 brass threaded inserts to be melted into the 3 holes of the mount.
3 x M4 screws. (Optionally, 2 screws and 1 thumb screw)

Note: The V7 version might work on the Hapstone V5 and V6, I have not tested them for those 2 models so please let me know if it works for them also.

If you find my designs useful, please go ahead and click on "Tip Designer" to the right of the photos at the top of this page. Proceeds will be used to purchase printing filament so I can keep designing and testing cool new things that you might find useful.

Thank you!

NOTES:

Brass Threaded Inserts Example:
https://www.am

chosera edge pro gritomatic hapstone hapstone v7 hapstone v5 hapstone v6 KME Knife Sharpener Ruixin sharpener sharpening sharpening jig sharpening stone tsprof wicked edge chosera edge pro gritomatic hapstone hapstone v7 hapstone v5 hapstone v6 KME Knife Sharpener Ruixin sharpener sharpening sharpening jig sharpening stone tsprof wicked edge

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format