Harbor Freight long hex socket gridfinity

I decided to make my own magnetic tray to fit these sockets. These used a 4x4 gridfinity base and if base magnets are needed they should fit in tightly with no glue needed. The sockets are held down with 3mmx10mmx60mm bar magnets. These slide in the side of the model and should also fit snuggly without the need for glue. One magnet will need to be broken off to fit flush, or you could use a different-length magnet. This is just what I had on hand. V2.5 is a bit taller than V2.4, which is to be a