Harbor Freight Small Bin Inserts

Update 2025-04-09: Added 2x4 and 4x2 Horizontal and Vertical boxes by request. Inserts for the small Harbor Freight Organizer Bins. Inserts have a spot for labels. Versions for both vertical and horizontal orientations.This is inspired by the many of the other inserts that I have tried over the years; none of them exactly matched my needs so I finally designed my own version. I hope others find this useful. I printed all of these with a 0.4mm nozzle at 0.28mm layer height in PLA on my Bambu Labs P1S. I recommend ironing the top most layers especially if you want to write on the label. The 3x4 and 4x3 inserts may need a brim (otherwise the tend to fall over at about the 90% done mark.) All but the smallest inserts were printed successfully in “Sport” mode. Many different sizes.Files are named using the following pattern:A_B_CxD.stl:A: SB = Small Bin (Will be releasing versions for the Medium and Large Bins later)B: V = Vertical OR H = HorizontalC: number of Horizontal divisions/ColumnsD