Harley Quinn

Project: Harley Quinn.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x112.5mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 1.4mm and the Actual Depth is 1.4mmFilaments Used: PLA Overture Matte Blue Transmission Distance: 0.5 PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 PLA PolyLite White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Blue At layer #6 (0.56mm) swap to Black At layer #8 (0.72mm) swap to Scarlet Red At layer #10 (0.88mm) swap to Lemon Yellow At layer #13 (1.12mm) swap to White for the rest.