Harlock Hueforge - Albator

MembershipBoost MeN’oubliez pas de télécharger l’outil de fixation murale ci-dessous :Don’t forget to download the wall mounting fixture below:https://makerworld.com/en/models/1406641-wall-mounting-fixture-for-hueforge-hexagonal#profileId-1459640 Project: Albator.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 240x206.4mm in sizeYou may print at higher layer heights below the Base Thickness of 1.28mmThe Max allowed Thickness is 3.04mm and the Actual Thickness is 3.04mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 5.5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #18 (1.52mm) swap to Jade White At layer #19 (1.6mm) swap to Black At layer #20 (1.68mm) swap to Red At layer #25 (2.08mm) swap to Jade White At layer #27 (2.24mm) swap to Yell