Haze plant vent

Upload the universal gcode on an SD card and insert it in any printer. Launch the gcode from the printer interface, ignore warnings and proceed. Adjust temperature and fan speed once the print starts to fit your filament needs

Printer requirements for the gcodes: preferably 0.6mm nozzle and at least 180x180mm buildplate

---

Haze Fits any 120mm PC fan


Cut the fan frame with pliers and attach it mid-print with thick double sided adhesive tape.


If you choose a USB fan, you can add a "usb fan speed controller" (Google it) to adjust and increase USB fan speed.

---

Watch this video to understand how Haze is made: https://www.youtube.com/watch?v=tFI38hTdewE

---

Bambu Studio / Orca slicer settings:

Global:

layer height: 0.3mm
line width sparse infill: 1.3
walls: 0
tops: 0
bottoms: 0
infill density: 25%
infill pattern: Grid
maximum length of sparse infill anchor: 0
infill/wall overlap: 100%
detect narrow internal infill: no
infill speed: 50mm/s
reduce infill retraction: no


Ha